"Solution for Size Reduction, Gradation and Mixing"

Material Handling Equipment

Showing all products from Group Material Handling Equipment

Pneumatic Flash Dryer

Pneumatic Flash Dryer will be effectively used for drying the wet material and convey it. The drying takes place in wide and high vertical tube. The material is sucked into the tube with a negative suction. The hot air is also carried with the material. Cyclones will be attached for the air and material separation. Necessary air lock will be provided with the system.

 
Inquiry Details
 

Bucket Elevator

A bucket elevator, also called a grain leg, is a mechanism for hauling flowable bulk materials vertically.

It consists of:

1. Buckets to contain the material;
2. A belt to carry the buckets and transmit the pull;
3. Means to drive the belt;
4. Accessories for loading the buckets or picking up the material, for receiving the discharged material, for maintaining the belt tension and for enclosing and protecting the elevator.

A bucket elevator can elevate a variety of bulk materials from light to heavy and from fine to large lumps.

A centrifugal discharge elevator may be vertical or inclined. Vertical elevators depend entirely on the action of centrifugal force to get the material into the discharge chute and must be run at speeds relatively high. Inclined elevators with buckets spaced apart or set close together may have the discharge chute set partly under the head pulley. Since they don't depend entirely on the centrifugal force to put the material into the chute, the speed may be relatively lower.

 
Inquiry Details
 

Blower

Blower is mainly used for transmission of air outside from various locations. It has got a wide range of applications like industrial, environmental, instrumentation, and chemical processing applications.
Our centrifugal blower is designed after a long research work carried out for specific requirements of our customers. We have developed the blower with special features more airflow in lower power consumption, maintenance free, long life smooth running with direct drive or V-belt driven.
We make a wide range of standard and customized blowers in MS and SS materials & various models.

 
Inquiry Details
 

Rotary Table Feeder

Rotary Table Feeders are used in industries, which require the moving or feeding of powder or granular substances. Table feeders are particularly helpful in moving sticky or hard to feed materials. They are also very useful in converting an intermittent batch process into a continuous material feeding process.

The amount of material leaving the rotary feeder can be controlled by changing the angle of the discharge plow via a hand wheel or by motor.

 
Inquiry Details
 

Rotary Air Lock Valve

Available size : 4" to 20". Rotary Air lock valve is suited for low and medium differential air pressure systems, gravity, or volumetric feeder discharge equipments. This will allow free flowing solids to pass from one to another valves space with a different air pressure. Rotary airlock is useful as one component in a bulk or specialty material handling system.

 
Inquiry Details
 

Z type bucket elevator

Bucket elevators are designed to move flowing powders or bulk solids vertically. Bucket elevators use an endless belt or chain and have a series of buckets attached to it. Bulk material is spread into an inlet hopper. Buckets (or cups) dig into the material and convey it up and over the head sprocket/pulley, and then throw the material out a discharge throat.

 
Inquiry Details