Ultrafine grinder is proposed for the grinding of crushed guar splits.
This grinder has abilityto grind the material without generating
too much heat. Material will be fed into the dryer.Oil will be the
media to convey the heat and deliver to the air.This hot air will
take the material into thedryer line where actual drying will take
place. Attached cyclone system will separate the material and hot
air. To heat the oil Thermic boiler will be used.
The material will be screened through centrifugal screen. Material
passing through the screen will be again screened through turbo
screens as additional control. This material will be sold as a premium
product. Oversize of the centrifugal screen will be screened through
turbo screen to separate another grade in terms of particle size
followed by additional screening. The oversize will be screened
through another turbo screen to separate another grade. Oversize
will be passed through another grinder. The material will be passed
through another screen. Oversize will be recycled to the same grinder.
Final material coming out from all the screens will be sent separately
by gravity in to the Nauta mixer for the blending and to make a
uniform lot. The products will be tested and packed.
The plant can be operated by 2 skill workers in a shift. The
loading/unloading and the packing of the final product can be
done on contract basis.
